How much oil does it take to deep fry a turkey?

How much oil do I need for a 24 pound turkey?

The 32-quart pot is good for turkeys up to 24 pounds.

How much oil is needed to fry a 10lb turkey?

When cooking turkey parts, oil temperature should be 325° F; may take 4 to 5 minutes per pound to reach the recommended temperatures (dark meat to an internal temperature of 175° F to 180° F, and white meat to an internal temperature of 165° F to 170° F). You’ll need 2.5-3 gallons of oil.

How long do you deep fry a 20lb turkey?

When the oil reaches the target temperature, slowly lower the turkey and basket into the fryer. Set the timer for 3 to 4 minutes per pound. For example, if you’re trying to decide how long to deep fry a 20 pound turkey, 3 x 20 = 60 minutes minimum. Turkey fry time for a 10 pound bird should be 30 to 40 minutes.

THIS IS EXCITING:  Question: How do you cook beef joint so it's tender?

Is 3 gallons of oil enough to fry a turkey?

Fill the pot with peanut or canola oil up to the mark you made earlier—you’ll need 4 to 5 gallons to fry a 12- to 14-pound turkey in a 30-quart pot. Turn the burner on, adjust the heat to moderately high, and heat the oil until the thermometer registers 375°F.

How long does it take to deep-fry a 24 lb turkey?

Slowly lower basket into hot oil to completely cover turkey. Maintain the temperature of the oil at 350 degrees F (175 degrees C), and cook turkey for 3 1/2 minutes per pound, about 45 minutes.

Do you put the lid on when deep-frying a turkey?

Once the fryer is lit, turn the burner up all the way. You do this by turning the hose regulator valve (the red one) to the left. Then put the lid on the pot and let the oil heat to 350°F.

How many minutes per pound do you deep-fry a turkey?

Maintain the temperature of the oil at 350 degrees F (175 degrees C), and cook turkey for 3 1/2 minutes per pound, about 35 minutes. Carefully remove basket from oil, and insert a meat thermometer into the thickest part of the thigh; the internal temperature must be 180 degrees F (80 degrees C).

Do you fry a turkey at 325 or 350?

The optimum cooking temperature for deep-frying the turkey is 350ºF. When the turkey is placed into the hot oil, the temperature will drop rapidly; therefore, it is important to preheat the oil to 375°F so that less time is required to restore the oil to the proper cooking temperature.

THIS IS EXCITING:  How do you keep porcelain grill grates from rusting?

How much oil do I need to deep-fry a 20 pound turkey?

20 Pound Turkey* – Use 5 to 6 gallons of oil and cook for 3 minutes per pound.

When should you inject a turkey before frying?

Traditionally, a fried turkey is injected with a marinade before it’s cooked; how long before cooking is a subject of debate. You can inject the turkey anywhere from 24 hours to 5 minutes before frying. We had good results injecting two hours before frying.

How many turkeys can you fry in the same oil?

Don’t let that deter you because you can reuse oil for frying. Under normal conditions, oil can be heated for up to six hours. A deep-fried turkey can cook in under an hour (three minutes per pound) so you can fry six items on six different occasions with a single batch of oil.

How many turkeys can you fry with one propane tank?

This depends on several factors. But in general, if you are cooking one turkey, one standard 20 pound propane tank will be more than enough to fully cook the bird and then some.

How many times can you use peanut oil after frying a turkey?

Shelf life

Peanut oil can usually be used three or four times to fry turkeys before it shows signs of going bad, according to the Texas Peanut Producers Board via The National Turkey Federation.